Model Coloring Pigment Metal Color Pen Painting Hand Safe 3D Printer Water-Based Bright DIY 5/milliliter Bottle 3055-3096 Good
[precautions]
1. Please shake well before use. Mechanical shaking equipment can be used instead of this work.
2. Hand coating can be used from no dilution, or diluted with purified drinking water, shake well before use, and determine the appropriate dilution ratio according to your feeling.
3. Just wrong, cotton swab dipped in pure water to wipe, just dry, cotton swab dipped in medical alcohol Tongsha chief paint. You can use pen soap or medical alcohol or our pen washing solution to clean the hand brush.
4. This model paint is specially used for hand painting. It is difficult to clean and discard the spray pen. It is not recommended to spray.
5. This model paint is completely different from other brands in bottom layer technology, so it is not recommended to mix it.
6. This model paint is just a model paint used for model toys... I think you think it can be used for other purposes
7. The bottle caps on the photos of the main picture and purchase options are painted by ourselves. You can choose from the photos, although there is a certain color difference
8. The general process of hand painting is to clean the oil and dust on the surface of the parts, dry them, and then make up the soil. After three hours of making up the soil, paint the surface. After one hour, touch the surface one night, dry it in three days, and use the cloth fermentation box for 40 degrees. After one night, the paint surface reaches the upper limit of product strength. According to the process, we can get the normal water-based model paint strength, which is not indestructible.
[instructions for use]
1. Shake your hands like a bartender. Please make sure that the parts have been cleaned of oil, dust and dry, and that the bottom surface of the soil has been filled with water (the soil can be filled more firmly, the paint can be hung more easily, and the base color can be unified, so there are many benefits in a word).
2. Gently squeeze a little paint from our special eye drops bottle and drop it onto the toner paper.
3. Wash the hand painting pen in pure water, dry it on the paper towel, gently point the tip of the pen, mix the small circles of the paint on the color matching paper, and gently try to apply a few strokes on the color matching paper (this hand painting can support the use of wet plate).
4. If you feel that the strokes are not smooth enough and the paint feels sticky, you don't need to wash the pen. Just like a dragonfly skimming water, dip the tip of the pen on the surface of the water and take a little bit of pure water, then mix it with the paint on the color matching paper, and then try to apply a few strokes in the blank of the color matching paper. Repeat the above steps, just feel smooth strokes, paint does not stick, stop.
5. Dip in a little diluted paint, lightly apply a brush on the blank space on the color matching paper to adjust the paint amount of the pen tip, and then use the pen belly on the side of the pen tip to pull the pen horizontally from top to bottom as far as possible, and thinly coat the whole part. After the first drying, do it again. In the second stage of this process, the parts can be adjusted in one direction to produce the effect of cross hand painting. If you think the effect after one time is already very good, you can not apply it for the second time.
6. In the whole process, please be light and weak, and take hand painting seriously.
